How To Reset FRP On XTIGI V5 Smartphone Using A Computer

Hello dear readers. Welcome to our blog. Today, I am going to show you How to reset FRP on XTIGI V5 Smartphone using a computer. If you are reading this article, most certainly you have run into an FRP problem on this phone and you certainly are trying to have it fixed. Don’t worry. I am going to take you through step by step procedure on How to reset FRP or Google Account on X-TIGI V5 Smartphone using a computer. You can also read our article on How to Flash Tecno S1S using Miracle Box

FRP stands for Factory reset protection. This safety measure was developed on Android by Google to secure Smartphones running android 5.1.0 and higher from unauthorized use after being hard reset. It is common knowledge that if your phone is protected by a security lock be it a password, a pin, pattern, fingerprint or any other kind of security lock, the first thing they will do if they can’t access your phone is to remove your SIM card, throw it away and then perform a hard reset. But the good news is that after they have hard reset your phone, they won’t be able to use it without having the Google account that was initially set on your phone.

Having said that, it’s in your best interest that you always have your Google account on your Android phone. That feature will not work without Google account having been set prior to your phone getting lost. Remember you can also track your lost phone using your Google account. But in case you have accidentally or just knowingly reset your X-TIGI V5 Smartphone and by bad luck you don’t recall what your Google account was, then, I am going to show you how to reset FRP on X-TIGI V5 Smartphone using Miracle Box software.

How To Reset/Bypass FRP On X-TIGI V5 Smartphone Using A Computer

Now, as I said before, if you performed a factory reset or a hard reset on this phone and have forgotten what your Google account was, then it means you can’t go through the setup and use your Smartphone again. You can use the manual FRP bypass method. But that is too hectic and requires great skills to perfect it. That is why I am going to show you how to rest FRP on X-TIGI V5 Smartphone using a computer. For this method, there are some of the requirements you will need to have.

Requirements:

  1. Windows PC or Laptop
  2. Miracle Box software installed and working
  3. MTK USB Drivers installed
  4. USB DATA cable
  5. Technical computer knowledge

If you don’t have Miracle Box software, You can download it Miracle Box here. Now, having the above requirements, follow the following steps on how to reset/bypass FRP on X-TIGI V5 Smartphone using a computer with miracle box.

  • Step 1

Start by opening your Miracle Box tool on your Windows PC or laptop if you have one. Sometimes you need to run Miracle box as administrator. I want to believe that there are several versions of Miracle Box software. But anyone of them starting from 2.58 will just work out fine. In this article, I am using v 2.82.

Read Also: How to Flash Itel 1351 Firmware and Fix Boot Mode Issues

  • Step 2

Now, having launched Miracle Box tool, click on the MTK button, even though it is always preselected.

C:\Users\MR. ABALA\Pictures\XTIGI 1.JPG

Now under MTK, click on Unlock/Fix Button. Now under that, select Clear Setting/FRP

C:\Users\MR. ABALA\Pictures\XTIGI 1.JPG

  • Step 3

Now, after you have completed step 2 above, on the miracle Box dashboard, click on the START button below.

C:\Users\MR. ABALA\Pictures\XTIGI 1.JPG

Now, at this moment, it is time to connect your phone to the computer via the USB data cable. Power off your phone or simply remove the battery and place it back. Connect the phone to the computer via USB data cable. Miracle box will detect your Smartphone and remove the FRP setting. Wait until the process is done 100%.

C:\Users\MR. ABALA\Pictures\XTIGI 2.PNG

  • Step 4

Finally, after the above process is completed, simply disconnect your phone from the USB data cable, remove the battery and place it back, (this is simply because the phone might not still power on since it is still in boot mode) power on the phone and complete the setup procedure. If by any case it still asks you for a password, just hard reset it and now set it up. Your phone should be ready to use again. That is How to reset FRP on X-TIGI V5 Smartphone using a computer.

NOTE:

This article is for educational purposes only. Its content should therefore not be used in any illegal activities. Technologysage.com will not be liable or take responsibility for any illegal activities as a result of the content of this article.

Another thing is that you should follow the due procedure carefully and as indicated in this article. Flash your phone at your own risk. Flashing your phone will nullify your Smartphone’s warranty and may also damage your phone.

Conclusion

Connecting your phone after clicking on the START button should have your phone automatically detected by miracle box. If your phone isn’t detected, check if your USB port is working. You can verify that when you hear the sound your computer makes when you connect your phone. If your USB port is working but still nothing happens, make sure you install the MTK drivers on your computer. Sometimes you will need to hold the boot key which is the volume up button.

Thank you all for reading, kindly follow our blog site and subscribe to get our articles as soon as we publish them. If you are on social media, kindly support our work by following our social media handles. Bye and see you again in our next articles.