Hello dear readers. Welcome to our blog site. In this article, I am going to show you how to reset phone lock on KGTEL KG1280 feature phone. Thank you for visiting our website. I hope by the end of this article you will have learned much and certainly your problem solved. If you are having this phone and unlocking it is a challenge, this article is going to help you solve your problem.
You can also read my other article on Sowhat S5 Firmware File Download and Flashing to learn how to flash sowhat S5 and fix various software related issues. Visit our website for more other related articles on mobile phone flashing and unlocking under the mobile phone section. Otherwise, let us look at how how to reset phone lock on KGTEL KG1280 feature phone.
How To Format And Remove Phone Lock On KGTEL KG1280 Feature Phone.
Now, unlocking this phone is not so hard. It’s quite a small phone but unlocking it can prove challenging if you are not sure of the best way to go about. It’s a feature phone with a type B charging port and therefore you don’t need to get into the hustle of obtaining a different USB cable or doing the pin outs. Let us now look at the simplest method on how to reset phone lock on KGTEL KG1280 feature phone.
KGTEL Phone lock Reset Procedure.
Now, kindly follow the following steps to unlock your KGTEL 1280 Feature phone. But before that, the following are the requirements you need to have to carry out this procedure.
- Windows PC
- Miracle Box software
- RDA Drivers preinstalled. (You can Download RDA Drivers here from this link)
- USB Data cable
Step 1
Launch Miracle box on your PC. Regardless of the version of the software you have, I bet it should still work fine provided the RDA drivers are properly installed. If you have a different box like the CM2 dongle, then you can use it though this procedure is only for miracle box users. You can also check another article on SOWHAT S1 Firmware file And “Unfortunately Voice command has stopped” Fix
Step 2
On miracle box, click on the “Coolsand/RDA” tab. Then now select the “ReadInfo” button.
See also: How To Flash WIKOO SMART 1 Firmware file
Step 3
Click on the start button. Power off your KGTEL KG1280, hold the zero (0) key. Connect your phone to the pc while still holding on that boot key. After a connection between your phone and your PC has been established, miracle box will read your phone’s passwords or phone locks. Use the phone locks obtained to unlock your phone.
Conclusion
That is the simplest method on how to reset phone lock on KGTEL KG1280 feature phone. If your phone is connection to the miracle box is still not established, kindly install RDA drivers to for your PC. Also make sure to disable driver signature before installing the RDA drivers. Otherwise thank you for reading and always stay tuned for more articles.
