SOWHAT S1 Firmware file And “Unfortunately Voice command has stopped” Fix

Hello dear viewers. In today’s article, we are going to look at how to flash SOWHAT S1 Firmware file on SOWHAT S1 smartphone. If you are having SOWHAT S1 smartphone and it is bricked or having any software issues, then this article is going to help you fix your SOWHAT S1 smartphone. This article will help you fix all software issues associated with this phone. Also, if you have been looking for SOWHAT S1 flash file, then you can also find SOWHAT S1 Flash file direct download link in this article. You can also see my other article on How to fix Invalid SIM on Itel A12

Why should you flash your SOWHAT S1 smartphone? There are reasons why you need to flash your phone. There are various reasons why you should flash your Android phone. These reasons are usually only if they are software caused. They include:

  • If the phone is bricked (dead)
  • Hanging on Logo
  • Stuck on boot mode
  • Android apps stopping
  • Some apps not working.

How to Flash SOWHAT S1 with SOWHAT S1 Flash file

Now, having confirmed that the problem with your SOWHAT S1 is one of the problems highlighted above, it’s without doubt that the only remaining thing you need to do is to flash a new SOWHAT S1 firmware file on your phone. This will fix your problem and you will be able to use your phone again. Before flashing your phone, there are a couple of things you need to have. Also check, How to bypass FRP on Tecno POP 3 BB2 Using DA File.

Requirements

  1. Windows computer
  2. SOWHAT S1 Flash file
  3. Miracle box 2.82 or later version.
  4. USB Data cable.

Step 1

Now, having made sure you have the above requirements, start with this first step. In the first step, the first you need to have to flash SOWHAT S1 Flash file on this phone is to first download SOWHAT S1 Flash file on your computer. You can download SOWHAT S1 Firmware file from the link provided. Extract the zip file on your Windows PC and move to step 2.

Step2

Now. At this point, you have already downloaded the firmware file on your computer and extracted the ZIP file. Now, launch or start the Miracle box on your computer. Sometimes you will be required to turn off antivirus and internet connection to have the miracle box work properly.

C:\Users\ABALA\Pictures\SAWHOT 1.JPG

Step 3

Now you have successfully launched your Miracle tool. Now you need to load SOWHAT S1 flash file on Miracle box in order to flash it on your phone. On miracle interface, click on the “Write” tab. down below click on the folder icon and navigate to the SOWHAT S1 Flash file folder and select SOWHAT S1 Scatter file and click “Open”

C:\Users\ABALA\Pictures\SOWHAT S5 1.JPG

Now on Miracle interface, you will see the file loaded as shown below.

C:\Users\ABALA\Pictures\SOWHAT S5 1.JPG

Step 4

After loading your firmware file, it is now time to start flashing your SOWHAT S1 firmware file on the phone. Now, click on the START button.

C:\Users\ABALA\Pictures\SOWHAT S5 1.JPG

As soon as you see “Waiting for USB port,” it is now time to connect your smartphone to the computer. Switch it off or remove the battery and place it back. Now connect your SAWHOT W2 smartphone to the PC using your USB data cable. Do not hold any boot key.

Step 4

Wait until your phone is connected. A window will pop up asking for the partitions you want to flash. Just click OK. Flashing will begin immediately. Don’t move your phone. Put your phone on a flat surface far from interruption. Wait until flashing is done at 100%. If you are using a laptop, make sure that your laptop has enough battery charge. After flashing is done, remove the phone from the USB data cable, disconnect the battery, put it back and power your phone up. Your phone should power up with the logo and you should be able to use your phone again. That is how to flash SOWHAT S1 Flash file on SOWHAT S1 smartphone.

Conclusion.

Make sure you use the SOWHAT S1 Flash file I have given in the link. Also, flashing your phone is at your own risk for your phone might be bricked. So make sure you back up your phone firmware. Also, make sure that you don’t interfere with the flashing process. Doing so might interfere with writing the files on the EMMC and it might damage your phone. After flashing, it might take a few minutes for the phone to load the new operating system so, you need to be patient. Lastly, if you have found this article a life saver to your problem, it is usually a good thing to show some appreciation. Kindly like our Facebook page, Follow us on Twitter, and also see more of our other articles as soon as we publish by subscribing to our website. Thank you and see you again in the next article.

 

 

I am a tech enthusiast with a passion for all things mobile phones, computers, software, games, and general technology tricks, tweaks & Mods. I pride in sharing this knowledge through blogging.