How To Flash WIKOO SMART 1 Firmware file

Hello dear readers. In today’s article, we are going to look at how to flash WIKOO SMART 1 Firmware file on WIKOO SMART 1 smartphone. If you are having WIKOO SMART 1 smartphone and it is bricked or having any software issues, then this article is going to help you fix your WIKOO SMART 1 smartphone. This article will help you fix all software issues associated with this phone. Also, if you have been looking for WIKOO SMART 1 flash file, then you can also find WIKOO SMART 1 Flash file direct download link in this article. You can also see my other article on How to fix Invalid SIM on Itel A12

Why should you flash your WIKOO SMART 1 smartphone? There are reasons why you need to flash your phone. There are various reasons why you should flash your Android phone. These reasons are usually only if they are software caused. They include:

  • If the phone is bricked (dead)
  • Hanging on Logo
  • Stuck on boot mode
  • Android apps stopping
  • Some apps not working.

How to Flash WIKOO SMART 1 with WIKOO SMART 1 Flash file

Now, having confirmed that the problem with your WIKOO SMART 1 is one of the problems highlighted above, it’s without doubt that the only remaining thing you need to do is to flash a new WIKOO SMART 1 firmware file on your phone. This will fix your problem and you will be able to use your phone again. Before flashing your phone, there are a couple of things you need to have. Also check, How to bypass FRP on Tecno POP 3 BB2 Using DA File.


  1. Windows computer
  2. WIKOO SMART 1 Flash file
  3. Miracle box 2.82 or later version.
  4. USB Data cable.

Step 1

Now, having made sure you have the above requirements, start with this first step. In the first step, the first you need to have to flash WIKOO SMART 1 Flash file on this phone is to first download WIKOO SMART 1 Flash file on your computer. You can download WIKOO SMART 1 Firmware file from the link provided. Extract the zip file on your Windows PC and move to step 2.


Now. At this point, you have already downloaded the firmware file on your computer and extracted the ZIP file. Now, launch or start the Miracle box on your computer. Sometimes you will be required to turn off antivirus and internet connection to have the miracle box work properly.

C:\Users\ABALA\Pictures\SAWHOT 1.JPG

Step 3

Now you have successfully launched your Miracle tool. Now you need to load WIKOO SMART 1 flash file on Miracle box in order to flash it on your phone. On miracle interface, click on the “Write” tab. down below click on the folder icon and navigate to the WIKOO SMART 1 Flash file folder and select WIKOO SMART 1 Scatter file and click “Open”

C:\Users\ABALA\Pictures\SOWHAT S5 1.JPG

Now on Miracle interface, you will see the file loaded as shown below.

C:\Users\ABALA\Pictures\SOWHAT S5 1.JPG

Step 4

After loading your firmware file, it is now time to start flashing your WIKOO SMART 1 firmware file on the phone. Now, click on the START button.

C:\Users\ABALA\Pictures\SOWHAT S5 1.JPG

As soon as you see “Waiting for USB port,” it is now time to connect your smartphone to the computer. Switch it off or remove the battery and place it back. Now connect your Wikoo Smart 1 smartphone to the PC using your USB data cable. Do not hold any boot key.

Step 4

Wait until your phone is connected. A window will pop up asking for the partitions you want to flash. Just click OK. Flashing will begin immediately. Don’t move your phone. Put your phone on a flat surface far from interruption. Wait until flashing is done at 100%. If you are using a laptop, make sure that your laptop has enough battery charge. After flashing is done, remove the phone from the USB data cable, disconnect the battery, put it back and power your phone up. Your phone should power up with the logo and you should be able to use your phone again. That is how to flash WIKOO SMART 1 Flash file on WIKOO SMART 1 smartphone.


Make sure you use the WIKOO SMART 1 Flash file I have given in the link. Also, flashing your phone is at your own risk for your phone might be bricked. So make sure you back up your phone firmware. Also, make sure that you don’t interfere with the flashing process. Doing so might interfere with writing the files on the EMMC and it might damage your phone. After flashing, it might take a few minutes for the phone to load the new operating system so, you need to be patient. Lastly, if you have found this article a life saver to your problem, it is usually a good thing to show some appreciation. Kindly like our Facebook page, Follow us on Twitter, and also see more of our other articles as soon as we publish by subscribing to our website. Thank you and see you again in the next article.



George Abala
I am a tech enthusiast with a passion for all things mobile phones, computers, software, games, and general technology tricks, tweaks & Mods. I pride in sharing this knowledge through blogging.