Hello, in this article, I am going to teach you How to Remove Privacy Protection Lock from WIKOO SPARK VIEW Smartphone Using a Computer. I want to understand that up to this point you are reading this article, it either you have come face to face with this problem or, it’s for the purpose of wanting to know How to Remove Privacy Protection Lock from WIKOO SPARK VIEW Smartphone Using a Computer because someday you ones faced this situation. You can also check my article on OPPO A5 Security Lock Unlock With MRT Crack 3.19
The most obvious thing that many people do when they are first faced with the privacy protection lock is to try to do a hard reset. But it dawns on them that a hard reset cannot solve this problem. It is a serious problem that can’t be solved by resetting your phone to factory settings.
What is Privacy Protection Lock on Android?
First, before we proceed on our topic on how to remove Privacy Protection Lock from WIKOO SPARK VIEWSmartphone Using a Computer, we need to first understand what this we are dealing with is. Privacy Protection is a kind of special protection for Android devices, besides FRP, that ensures that no one will use your phone after doing a factory reset with a SIM card different from that which is set to be used. For example, if I enable mobile antitheft settings on my phone, it’s only the SIM cards present during the time I am enabling this setting that will only be allowed to be used. If I insert any other SIM card, then I will have to provide Privacy Protection Key to unlock the phone. I sometimes back did an article on how to unlock the security code on itel it5081. You can check it out for more. Now, let’s proceed on How to Remove Privacy Protection Lock from WIKOO SPARK VIEWSmartphone Using a Computer.
How to Remove Privacy Protection Lock from WIKOO SPARK VIEW
Now, if you are having WIKOO SPARK VIEW smartphone and you are unable to remove the Privacy Protection Lock despite doing a hard reset (which Am certain you’ve done), I am going to show you How to Remove Privacy Protection Lock from WIKOO SPARK VIEWSmartphone Using a Computer.
Requirements you need to Remove Privacy Protection Lock on WIKOO SPARK VIEW
Now, in order to remove the privacy protection lock on WIKOO SPARK VIEW smartphone, you will be required to have the following:
- Windows Computer( Running at least Windows 7)
- NCK Dongle MTK tool. Either with a dongle or you can use crack.
- USB Data Cable
- MTK VCOM drivers are already preinstalled.
- Technical Mobile Flashing knowledge.
Steps on How to Remove Privacy Protection Lock from WIKOO SPARK VIEWSmartphone Using a Computer
Now, hope you have met the above requirements and you have your WIKOO SPARK VIEWready, kindly and keenly follow the following steps on How to Remove Privacy Protection Lock from WIKOO SPARK VIEWSmartphone Using a Computer.
See Also: Top Software You Need On Your Work Computer
Step 1
Now, since carrying out this exercise is going to cost you all the data you have inside your phone; make sure to make a backup. If you have decided to forfeit all your data, proceed. The first step is to launch the NCK Dongle MTK version. If you have the NCK dongle or box, it is good for you. If you don’t have one, you can use NCK Dongle MTK version Crack. Launch the NCK Dongle tool. In this tutorial, I am using NCK Dongle MTK version 2.5.6.2
Step 2
Now, after you have launched your NCK MTK tool on your computer, the second thing you do is to select the correct flash type for your WIKOO SPARK VIEWsmartphone. Now, the reason why I chose NCK is that it works pretty fine with NAND flash, unlike Miracle Box. Miracle Box works fine with EMMC. NCK works well with both. Now under Flash type, click on the dropdown key and scroll down to MT6572 NAND. This is the flash type for WIKOO SPARK VIEW. After that, on the dashboard, click on the SERVICE button.
Step 3
Now, Under SERVICE, you will see many other options, Click on the RESET PRIVACY button on the far right side.
Now, at this moment, the NCK Dongle MTK tool will initiate this command and will now wait for you to connect your smartphone to the computer through your USB data cable.
Step 4
Now, it’s time to connect your phone. Switch off your phone or simply remove the battery and place it back. Don’t hold any key; connect the phone to the computer with your USB data cable. After the phone is connected, as soon as the connection is established, NCK will detect your phone, and immediately, it will start removing the Privacy Protection lock on your WIKOO SPARK VIEW. Wait and don’t interfere with the progress. It should take about a minute.
Also Read: How to find WiFi password on a router connected on a PC with Ethernet cable
As soon as it shows the green bar with 100% on it, it means it’s done. Disconnect your phone from the computer, remove the battery, and place it back. Power your phone on and wait until it boots up. It should boot up successfully and this time around, without Privacy Protection Lock.
Conclusion
Kindly follow the steps above keenly. While NCK is reading your phone, put the phone in a stable place where you will not move it or temper with it. If you accidentally interfere, it might result in your phone getting damaged. Lastly, if you are finding it hard to get the tool, kindly contact me through our social medial handle specifically Facebook. Thank you for reading. I hope someone has found this article helpful. You can join our forum and also join us on our social media handles and you can support us by subscribing to get the latest updates on our educative articles. Thank you and see you in the next one.