Hello. In today’s article, we are going to look at How to Flash the Huawei Y3II smartphone hanging on the logo. If you are having this phone and it is stuck on the HUAWEI logo or Android robot, then this article is going to help you fix this issue. Alternatively, if you have been looking for Huawei LUA-U02 scatter firmware file, then you can also find it in this article and you will be able to flash your Huawei Y3II (LUA-U02) smartphone using your computer.
One thing you need to know is that flashing your Android smartphone is risky. You might permanently brick your phone and you will also lose your Data. If your phone is just OK and you only want to upgrade to another higher update, make sure to do a backup of your personal files before you start making an update. Otherwise, let us read along and learn How to Flash Huawei YIII (LUA-U02) smartphone hanging stuck logo. In the meantime, you can also check my article on Safaricom Neon Ray J11 Pac. Firmware Download and Flashing Free
How to Flash Huawei Y3II (LUA-U02) smartphone
Now, in this article, we are going to learn how we can flash the Huawei LUA-U02 firmware files to fix various software issues on this phone. First, before we move further, we need to know at what point you need to flash the Huawei Y3II stock firmware file on this phone. Here are various reasons for stock ROM flashing:
- Phone stuck on logo
- Phone stuck on Android Robot
- Phone boots and automatic boots into recovery mode
- The phone automatically enters fast boot mode
- The phone is bricked
- The phone is in the boot loop
Now, if your Huawei YIII LUA-U02 smartphone is suffering from the above-listed diseases, then this article is going to help give the best remedy for your phone. The best thing to do is to fix is it with new stock firmware.
Method on How to Flash Huawei LUA-U02 Stock firmware Using A Computer.
There are three methods by which you can write a new firmware on Huawei YIII or simply Huawei LUA-U02 smartphone. You can use the OTA firmware, you can use the SD card upgrade and you can use the Huawei LUA-U02 USB Upgrade firmware where you will use a computer. We are going to look at them later.
Step1
The very first step is to make sure you have the firmware file. Make sure, before getting the firmware for your phone, that you check the model number and the build number correctly. Now, Download Huawei LUA-U02 firmware files from this link that I have provided in this article.
Step 2
Now, after downloading Huawei Y3II (LUA-U02) firmware from step 1 above, extract the zip file on your PC. You will see there are 3 files where one is for OTA Upgrade that you can install from your phone’s settings, the second one will be the SD Card upgrade that you can install through the recovery menu, and the third one, the USB Upgrade which is the scatter firmware which you can use your PC to flash your phone. Also, check my other article on how to Unlock the Security PIN/Password on OPPO A1K-CPH 1923
Step 3
Now that you already have the firmware file, choose the best suitable method you can install on your phone. If you can still access the recovery menu, you can use your SD card to install the firmware through the SD Card. If you can’t or in one way or another you don’t have the SD card, you can install the firmware by flashing it using the PC. In this method, you can use the SP Flash tool to flash your software, or rather, you can use other phone flashing software like Miracle box, NCK, or CM2 software. See also How To unlock Nokia TA 1270 M-Kopa Smartphone
Step 4
After successfully flashing the firmware, using whichever method you have chosen according to your phone’s condition, just boot up your phone by powering up the phone, or if you have used the SD card or OTA files, the phone should reboot on its own. After firmware installation, the phone might take quite a little time to boot. Just give it some time. After booting is done, you should be able to use your phone with all the problems fixed.
Conclusion.
Always make sure that you have backed up all your important files from your phone if you can still access them. Also, if you can, try to make a backup of your phone’s firmware as a contingency before flashing the new stock firmware just in case things go sideways. You can use NCK, Miracle box, or CM2 to make a firmware backup. Lastly, if your phone is still stuck on the logo even after flashing a new ROM, it means there is a problem with your phone’s EMMC. In that case, you will need to take your phone to an advanced technician with EMMC repairing and reprogramming tools. Thanks for reading and see you aging in the next article.
