How To Fix Slow Or Hanging Problem On itel 1508 Smartphone

Hello dear readers. Welcome to our blog site. In today’s article, I am going to show you how to fix hanging or slow itel 1508. Welcome and thank you for supporting us. By visiting our blog, you are doing us great favor and you are the reason why we are still writing. If you are having your itel 1508 and it is stuck on logo or on fast boot mode, this article is going to help you on how to fix itel 1508 stuck on fast boot mode or hanging on logo.

Now if your itel 1508 is, slow, hanging or hanging on logo and not finishing boot, then the first thing you need to do is to perform a hard reset. This should solve your problem but if after performing a hard reset you still are stuck on logo, then continue with this article for it will still solve your problem. If your phone is still slow and painfully hangs or apps are stalling, then performing a hard reset will not solve your problem. Also, kindly check my other article on how to unlock password on Nokia TA 1270 M-Kopa smartphone.

Method on How to Fix hanging or slow itel 1508 Smartphone

Now, if you have performed a hard reset and you are still encountering this hanging problem, then I am here to help you fix your problem. First, I have to tell you that this is a software issue. What you need to do is to flash itel 1508 Stock firmware on your phone. This will help and fix your problem. Now, before we proceed on how to fix hanging problem on itel 1508 smartphone, there are a number of things you will be required to have.

Requirements to flash itel 1508 smartphone With hanging problem

Here are some of the requirements you will need to have.

1. Windows computer
2. Itel 1508 Stock factory firmware
3. Research Download tool.
4. USB Data cable

Now, after making sure that you have the above listed requirements. You can now proceed on how to fix itel 1508 hanging problem. Check also how to bypass FRP on itel A14 smartphone.

How to Flash Itel 1508 Smartphone

Step 1

Hoping you have all the listed requirements, Download itel 1508 stock firmware and extract it on your windows computer. Usually it is a RAR file or a zip File. Extract the zip file using WINRAR or 7 ZIP software. Inside, you will see the itel 1508 pac file and the research download tool.

Step 2

At this point, you need to open the tool that you will flash this file with. Usually for SPD smartphones, the flashing tool is Research download tool or SPD flash tool. Try to launch the Research download tool that comes with the firmware file. If the tool doesn’t launch, then try to launch another different version.

Step 3

Now, it is time to load the firmware file on the research download tool. To do so, click on the gear cog just above the “PORT” tab. Navigate to the itel 1508 stock firmware folder and select the itel 1508 pac file.

Click on the ‘OPEN’ to load the pac file on Research Download tool. The pac file will start loading on Research download tool. It takes a few minutes so just be patient enough until it is done.

Step 4

After the firmware file is loaded successfully, it is now the time to flash the itel 1508 stock firmware to fix slow or hanging issue on itel 1508 smartphone. To do so, switch of your phone and remove the battery. On Research download tool, click on the play button. The third button from the left. Connect your USB Data cable to the computer first without inserting it into the phone’s port. On the phone, hold the volume down button; insert the USB cable in your phone while holding the volume down (Vol-) and quickly connect the battery. After you here the connection sound, Research download tool will start flashing your file on your phone. Put the phone on a stable surface and let flashing run until you see ‘PASSED’ displayed on research Download tool.

Step 5

Now, flashing is done. Disconnect your itel 1508 from the USB cable, disconnect the battery from the phone and place it back. Power on the phone using the power key. Wait for the phone to boot up. Complete the start up settings and you will now be able to use your phone freely. That is how to fix slow or hanging problem on itel 1508.

Conclusion.

You should note that flashing your phone may damage your phone permanently if you don’t follow the highlighted instructions. Make sure that you are flashing itel 1508 with the compatible firmware file. If you can access the settings on your phone, check the build number in “About phone” to make sure you have the right firmware version matching that on your phone. After flashing, make sure you disconnect the battery and place it back. Your phone will not boot up if you don’t do so because SPD phones cannot boot up while still in download mode. After flashing, the phone might take long to boot up. It is normal since it is loading the new operating system. Lastly, kindly show us support by following us on our social media pages, like and comment and also subscribe to receive updates as soon as we publish new article. In case you need any help, kindly reach me on my Facebook inbox. Thank you and see you again next time. Thank you and bye.