How To Fix Tecno S1S Touch Screen Not Working Problem

Hello technology sagers. Hope you are doing great. Before I start off this article, I want to say that am so glad for your support. By visiting and reading our articles, you are doing us much help and thanks also to those who have been reaching me on Facebook for queries and messages of appreciation. We wouldn’t be where we are without you. In today’s article, I am going to help you on How to Fix Tecno S1S touch screen not working problem. Problems of touch screens not working in most cases it is a hardware problem which asks for a change in the touch screen where all you have to do is buy a new touch screen, take your phone to a technician to change your screen. Touch screen problems usually occur do to the physical damages to the touch screens. If you dropped your phone and it impacted in a screen damage causing the phone not to respond to touch, then all you need to do is change the screen. But if it is not, and you are sure the problem came out of nowhere or due to an update you did on your phone, then this article will greatly help you.

How to Fix Tecno S1S touch screen not working problem

As mentioned earlier, touch screen not responding to touch mostly it is as a result of the damage to the touch screen. The physical damage or tempering to the touch screen will result into the phone not responding to touch. If you are sure that your touch screen is damaged due to a physical damage, then this article is not for you. Take your phone to a phone technician andreplace your touch screen. If by any chance you have all the reasons beyond any possible doubt that your Tecno S1S touch screen not responding has nothing to do with physical damage and that your screen is fine, then, you can read this article and learn How to Fix Tecno S1S touch screen not working problem.

Method on How to Fix Tecno S1S touch screen not working problem

I don’t know how accessible you are to smartphones. As for me, I had a way of accessing a similar model. In fact, I had never expected or come across a problem where such a problem can be as a result of a software issue. What I did is a found a similar exact phone and changed the screen of a working model and I found out that despite changing the screen, it still never worked. When I tried the motherboard of the other phone on the screen of my phone, I found out that the touch was responding. I therefore came to a conclusion that it was not a touch screen problem rather than a software issue. Read another one of our article on How to root android 6 Marshmallow without a computer. Otherwise, let us proceed with this article.

Must Read:  How To Bypass/Remove FRP on Tecno Droid PAD D702AS Tablet

Requirements

  1. Windows PC
  2. Tecno S1S Firmware file
  3. USB Data cable.
  4. Miracle Thunder 2.82 or Alternatively SP Flash tool latest version.

Step 1

Having made sure that the problem you are encountering is not a hardware issue, now you need to follow these steps keenly to solve this problem. The first step is to first Download the Tecno S1S firmware file. Now here, you need to make sure you are Downloading the exact model and built number. In this case, this phone is Tecno S1S and the built number is S1S-H8016D-M-KESF-170606V50. In my case, I used NCK tool to dumb the firmware from a similar phone. If you dont have a similar phone to read from, you can Download the Tecno S1S firmware scatter firmware from this Direct link.

C:\Users\ABALA\Pictures\TECNO S1S TOUCH PROBLEM 2.JPG

But you can download the firmware from link provided. Extract the file you have downloaded from a file path you can easily find.

Step 2

Now, after you have downloaded the file in step 1 above, you now need a tool to flash or write the file to your phone. In this case, if the file you downloaded is a scatter file to be flashed with SP Flash tool, download SP Flash tool latest version. Alternatively, you can use Miracle box tool. In my case, I used Miracle 2.82. If you have a higher version or slightly lower, it should just work fine. For the purposes of this article, I will show a pictorial demonstration using miracle box. Open miracle box tool.

C:\Users\ABALA\Pictures\Originals\Miracle 1.JPG

Step 3

Having launched Miracle box, on the miracle interface, click on the “Write” button. Now, down you will see a folder on the interface. Click on the folder to navigate to the directory you saved your Tecno S1S firmware you downloaded.

C:\Users\ABALA\Pictures\Miracle 1.JPG

From the folder containing your firmware file, only select the scatter text file then click on “Open” button. You will see the firmware information of the phone displayed on the interface on the right side.

Must Read:  Various Ways on How to Connect your PC or Laptop to the Internet

C:\Users\ABALA\Pictures\Miracle 1.JPG

Remember after loading the firmware to the Miracle box flash tool, select the “Format All (Android)” button. This option will remove your EMEI information after flashing. You can write IMEI back after flashing. IF you dont have Miracle Thunder 2.82, Dont worry. You can use SP Flash tool. Load the scater firmware on SP Flash tool, go to “Format” tab, then select “Format all except bootloader” Connect the phone to the computer. SP Flash tool will formart your phone. Then proceed to download the firmware partitions to your phone.

Step 4

After the above procedure, the remaining procedure now involves writing your system partitions on your Tecno S1S. Click on the “Start Button.” Switch off the phone or remove the battery and place it back. Connect your phone to the computer using USB data cable. Don’t hold any key. After connecting, miracle will display the partitions that are contained in the firmware file. Here you can choose which partition to write, that is if you are so specific in writing a certain partition. But in this case, we are writing all the partitions. So, just select OK… Miracle will start writing the files on your phone. Be patient and wait until it is done at 100%.

C:\Users\ABALA\Pictures\TECNO S1 TOUCH PROBLEM.JPG

After writing is complete, disconnect your phone from the computer, power it up. The first boot might take long. Wait until boot is done. Restart your device and skip the initial set up settings. At this point, your touch panel should now be responding to touch as usual.

Conclusion

Make sure to follow the due steps as shown in the article. Make sure that after loading your firmware file, select the “Format All (Android)” option. If you don’t format and just directly write the files, you will still remain with the same problem. After flashing, make sure you write your EMEI or else your phone will not have service. There are articles I did on how to write IMEI on a couple of phones. Check the articles. Thank you and pleas support our work by subscribing to our website to receive updates as soon as we publish them. Also remember to follow us on our Facebook, tweeter and Instagram.