FRP Bypass on Samsung J200H/DS

Hello dear readers. Welcome again to our blog site. In today’s article, I am going to show you how to bypass FRP on Samsung J200 smartphone. As mentioned in my other articles, FRP is a Google initiative to protect all Android 5 smartphones and later from falling into unauthorized hands in case they are lost. FRP simply stands for Factory Reset Protection. In case someone steals your phone, the first thing they usually do is to remove the SIM card. Switch the phone off and then perform a hard reset. But Google came up with FRP to protect Android from such unauthorized use of your phone in case it is lost. Check also, How To Flash Tecno S1S Using Miracle Box

When you perform a hard reset, the moment your phone boots up, you will be required to enter the Google account initially on the phone. But sometimes we create accounts we can’t memorize. This article is only for educational purposes. If you have Samsung J200 smartphone and you are unfortunately stuck on Google account, then this article is meant to help you. I will show you how to bypass FRP on the Samsung J200 smartphone using a computer.

Also Read: How to Fix Support API 3 On Infinix X559c

Samsung J200H/DS FRP Bypass Using a Computer with Samsung Z3X Tool.

I am going to show you how to bypass FRP on Samsung J200 using a computer and Samsung Z3X flashing tool. If you don’t have a computer, then you will have to find another way on how you can bypass the FRP on the Samsung J200 smartphone.

The requirements for Bypassing FRP on Samsung J200 with Z3X

For this process, you need to have the following requirements:

  1. Windows Computer
  2. Samsung Z3X v2.95 (Crack or Box if you have one)
  3. USB Data cable
  4. Technical computer flashing knowledge.

Step 1

Now, as I said earlier, this process is only for those with Computer and Samsung Z3X too. If you have a Samsung Z3X box, then it’s good for you. If you don’t have a Z3X box, all is not lost for you. You can use the Samsung Z3X crack tool. Launch the Samsung Z3X tool and under the models, scroll until you find the SM J200H/DS model as shown below

C:\Users\MR. ABALA\Pictures\J200H DS FRP 1.JPG

Step 2

Now after selecting your Samsung model number on the model’s list, now move to this step. And remember to check underneath the battery for the correct model number. For J2, there is J200F, J200F/DS, J200H, J200H/DS, J200K, J200M, J200M, and many others. Now go to the UNLOCK tab.

C:\Users\MR. ABALA\Pictures\J700FDS 3.JPG

Step 3

Now on your Samsung Galaxy J2 smartphone, switch it off or remove the battery and place it back. Boot the phone into download mode. To boot Samsung J200 into Download mode, hold the Volume Down, Home key, and power buttons simultaneously. When the next screen appears, press the volume up button to enter the download mode as shown below. You might also find it interesting to read our article about how to Solve MTK S BROM Download DA Fail (ERROR 2004) on SP Flash tool.

C:\Users\MR. ABALA\Downloads\http___www.galaxys6manuals.net_wp-content_uploads_2015_10_enter-download-mode-on-samsung-galaxy-s6.jpg

Step 4

Now after you have put your Samsung Galaxy J200 into download mode, connect it to the PC using the USB data cable. Now, back on the Z3X tool, under the actions tab, click on the Reset FRP/React/EE button on the right side. Z3X tool will automatically connect to your phone and remove FRP or Google account.

C:\Users\MR. ABALA\Pictures\J200H DS FRP.JPG

Disconnect your phone from the computer, remove the battery, place it back, and power your phone ON. Your phone will take some time to boot up. Relax and give it time. It should eventually boot up normal without FRP or Google account. Thanks all for reading. See you again in the next one. If you need the tool, kindly contact me.