How To Bypass FRP on Cubot A5 Smartphone Using NCK Tool.

Hello dear readers. In today’s article, I am going to show you how to bypass FRP on Cubot A5 smartphone using NCK tool. Google, in collaboration with Android have establish security measures to make sure that people’s phones don’t get into wrong hands when they get lost. In line with this, they have set a security lock on latest Android smartphones operating on Android 5.1 and above in a way that the phone, after a factory reset, will ask for a previously set Google account and password in order to continue using it. But sometimes we tend to forget even our own details about the accounts we set and the passwords. In some cases, we buy even used phones and find ourselves into these problems. This prompts us to start finding ways through which we can solve these problems. If you are facing this problem on Cubot A5, don’t worry, I am going to show you how to bypass FRP on Cubot A5 smartphone using NCK tool. You can also see my previous article on How to Bypass FRP on Huawei Y5 smartphone using a computer.

Cubot A5 basic features

  • Android version 8.0 Oreo
  • 3GB of RAM,
  • 32GB of internal storage
  • 3000MAH of internal battery
  • MTK 6753 chipset

So as you see from the feature shown above, this model is quite something catchy for cubot lovers. In fact, it is one among the best productions from the cubot company. Now, let us look at how to bypass FRP on Cubot A5 smartphone using NCK tool.

How To Bypass Google Account Lock On Cubot A5 Smartphone Using NCK Tool.

Now, until this point, you already know what Google account lock is and how it works. If you are here in quest of how you can unlock Google Account or FRP on Cubot A5, then I am going to show you how to bypass FRP on Cubot A5 smartphone using NCK tool. Now, remember if you see it wise, you can also read how to repair IMEI on the D LIGHT M100 smartphone. Before we proceed, there are some requirements you will be required to have. They include:

Requirements needed to Bypass FRP on Cubot A5

  1. Computer
  2. NCK MTK tool
  3. MTK Drivers installed.
  4. USB Type C Data cable.

Steps On How To Bypass FRP On Cubot A5 Smartphone Using NCK Tool

Step 1

The first one of all steps is to start by launching the tool you need to carry out this procedure with. In our case, it is NCK MTK module. Some will prefer to use Miracle box. But personally I tried to use it but it couldn’t work on this chipset…sometimes Miracle is so choosy. I preferred to use NCK because it is safe and simple. So in our tutorial, I am going to use NCK to show you how to bypass FRP on Cubot A5. If you don’t have this tool, then you can reach me and we can make arrangements on how you can get it. Also see our other article on how to control your Android phone from Computer.

C:\Users\ABALA\Pictures\NCK.JPG

Step 2

Now, on the NCK interface, click on “SERVICE” tab.

C:\Users\ABALA\Pictures\NCK.JPG

Then on a set of displayed services, select “RESET FRP”

C:\Users\ABALA\Pictures\NCK 2.JPG

After that, a confirmation box will appear. Select “OK” on the confirmation box. Now, NCK will start waiting for you to connect your device.

C:\Users\ABALA\Pictures\NCK 3.JPG

Step 3

Now, after the above step, the remaining work is now easy. When NCK start waiting, it is now time for you to connect your device to the computer. To do so, just switch off your phone, connect your Cubot A5 smartphone on the computer using Type C USB data cable. NCK will then detect your phone and reset the FRP protection as shown below.

C:\Users\ABALA\Pictures\CUBOT A5 FRP.JPG

Step 5

After NCK has reset the FRP lock on your Cubot A5, disconnect the phone from the computer and try to power it up. Sometimes it might not come up because it is in boot mode. After you have powered it up, wait until it completes the initial boot. It may take longer. After it is done, finish the setup procedure and you will be able to use your Cubot A5. So guys, that is how to bypass FRP on Cubot A5 smartphone using NCK tool.

Conclusion.

Now, you need to know that Cubot A5 uses the most modern data cable; the type C data cable. The normal type B will not fit. Make sure you have the type C cable. Also, after you have finished resetting FRP with NCK, your phone might not boot up when you power it up with the power button. Connect the phone to a charger and then power it up with the power button. Finally, if you find this article helpful, kindly remember to leave us a like or a comment of our social media handle. You can also reach me on Facebook incase you have any questions. Also remember to subscribe to our website to receive updated article. Thank you and let’s meet again in the next one.

George Abala
I am a tech enthusiast with a passion for all things mobile phones, computers, software, games, and general technology tricks, tweaks & Mods. I pride in sharing this knowledge through blogging.