How to Flash Tecno T349 Feature Phone

Hello Technology sage readers. Welcome again to our blog site. Today, we are going to learn How to Flash Tecno T349 Feature phone. If you have Tecno T349 feature phone which is dead or you are experiencing problems with its functionality, then the solution to your problem might be that your phone needs to be flashed with a new ROM. If you find your Tecno T349 having hanging problem, stuck on boot mode or there is a certain app you cannot access, or even the phone keeps on going on and off without switching it off, then certainly you need to flash a new ROM. Having said that, Iam going to show you How to Flash Tecno T349 Feature phone.

Flashing this type of phone will require you to have a couple of tools to do the flashing. First, you need to make sure that the problem with your phone is not as a result f physical damage. Flashing will only solve software issues only. Physical damages will require you to take your phone to a technician at a phone repair shop. If you are certain that it is a software-based issue, then you will have to go ahead and do the flashing. You will require the following:

Read Also: How to Format kgtel K2090 feature phone


  • Tecno T349 firmware or flash file. You can download it here.
  • You will need Miracle Box
  • USB data cable

When you have made sure that you have the above requirements, You will now be ready to start the process on how to Flash Tecno T349 feature phone. Please follow precisely the steps below on how to Flash Tecno T349 feature phone.

How to Flash Tecno T349 feature phone firmware with Miracle box.

Step 1

Download your Tecno T349 firmware and extract it to a folder of your choice. You can download Tecno T349 firmware or stock ROM by clicking on this link. It is just a small file less than 5 MBS. So don’t worry about your data usage. Make sure to extract it in a folder that will be easier for you to find.

Step 2

Now, after downloading and extracting your Tecno T349 firmware to a folder of your choice, Open miracle box folder and run Miracle Box loader as administrator. I have not provided a download link for this software so, if you don’t have it, you will need to find it online. Wait until miracle box opens, on the dashboard, click on “MTK” button. This is because Tecno t349 is built on MTK chipset.

C:\Users\Mr. Priest\Pictures\Tecno T349 1.PNG

Step 3

Click on the ‘Write’ button. It is here that you will have to write the firmware to your phone. Click the ‘write’ button, then click on the folder below as shown in the screenshot below to navigate and select the folder where you extracted your Tecno T349 firmware.

C:\Users\Mr. Priest\Pictures\Tecno T349 2.PNG

Step 4

After you have found the folder where you have extracted your firmware, click on the ‘open’ button to load your Tecno T349 firmware on miracle box. After you have loaded your firmware, it is now time to start flashing or writing your firmware. Click the ‘Start’ button.

C:\Users\Mr. Priest\Pictures\Tecno T349 4.PNG

Step 5

Having done everything until this point, your firmware is correctly loaded to Miracle Box and is ready to be written to your Tecno T349 phone. Now, you need to connect your phone to your computer through the USB cable. Connect your USB cable to the computer’s USB port. Hold zero (0) button on your Tecno T349 and connect the USB cable. Your phone will be connected and flashing will start immediately. Wait as your firmware is flashed. Be patient until flashing is done. Disconnect your phone, remove and insert the battery and boot it up.

C:\Users\Mr. Priest\Pictures\TECNO T349 FLASH.PNG

That is the simple steps on How to Flash Tecno T349 feature phone. Thank you all. I hope this article has given you the help you have been looking for.

I am a tech enthusiast with a passion for all things mobile phones, computers, software, games, and general technology tricks, tweaks & Mods. I pride in sharing this knowledge through blogging.