Hello dear readers. I am going to show you Fix Unfortunately Voice Command has stopped on SOWHAT V1 smartphone with SOWHAT V1 Firmware file. Thanks for visiting again. You have been so supportive and so good to us by visiting our website and reading our articles. So if your SOWHAT V1 is displaying the unfortunately voice command has stopped, or hanging on the logo, then this article is going to help you with How To Fix Unfortunately Voice Command has stopped on SowHat v1 using SOWHAT V1 firmware file. Kindly make sure that you read this article to the end and follow the due procedures to the latter.
First of all, it is rare to find SOWHAT V1 firmware file. This website is the first one to ever have SOWHAT V1 firmware. This phone is cloned phone. Cloned firmware files are rare to come by and I suppose you are glad this article is here. So if you have been looking for SOWHAT V1 clone firmware file, then don’t worry. If your phone is dead and you want to flash it, then here is how to Flash SOWHAT V1 smartphone with SOWHAT V1 Firmware file. You can also check my other article on how to Repair IMEI on INFILEX X5 smartphone.
Table of Contents
SOWHAT V1 Firmware File Flashing
Now, if you are having software issues where your SOWHAT V1 smartphone in that the phone is stuck on the INFILEX logo, the phone not powering on, dead or Android apps stopping, then the only thing you need to do is to flash SOWHAT V1 stock firmware on your phone. So today, we are going to learn How to flash SOWHAT V1 firmware file and fix software-related issues on SOWHAT V1. Before we proceed, there are things you will need to have.
- Windows PC
- SOWHAT V1 stock firmware file
- NCK MTK tool/ Miracle thunder
- USB Data cable
Procedure On How To Fix “Unfortunately Voice Command has stopped” on SowHat v1 and Flashing SOWHAT V1 Stock Firmware
So, considering that you have met the above requirements, now, follow the following steps carefully in order to flash SOWHAT V1 firmware.
The very first step is to make sure that you have your firmware file ready. Download SOWHAT V1 stock firmware file from this link. This file is a premium file and it is compressed. Extract the SOWHAT V1 file on your PC and save it in a folder that you can easily locate.
After Downloading and extracting the firmware file on your PC, it is now time to launch the flashing tool. In this case, you can only use the Miracle box or the NCK MTK tool. This file can only be used with those two. SP flash tool cannot load the files. In this tutorial, I am going to use the NCK MTK flashing tool. Launch NCK tool.
On the NCK MTK tool, click on the ‘OPEN SCATTER FILE’ button. This will lead you to navigate to the folder where you extracted the SOWHAT V1 firmware file. Select the scatter text file and click ‘OPEN’
After loading the scatter file, on the top left side, select and click on ‘WRITE FLASH’
Now it is time to connect your SOWHAT V1 to start flashing the firmware file. Remove the battery, connect the phone the PC without battery then insert the battery until you hear the device connection sound. As soon as the phone is connected, flashing will begin. Wait until flashing is done.
After flashing is done, disconnect it from the computer, remove the battery and place it back. POWER up the phone. wait until it completes the first initial boot. Finish the start-up settings. Your phone will be fine and will work out fine without any issues.
Point to NOTE:
Don’t worry about the firmware version provided here. You will realize that when you download the firmware from the link provided, it is the firmware for sowhat v3. The sowhat v3 is still compatible with the sowhat v1. So don’t worry about flashing the version 3 on version 1. It will work out fine. I have personally tested it on version 1 and it works like a charm.