Hello dear readers. Welcome ones again. In this article, we are going to look at latest method How to bypass FRP on Samsung A10S Without using test points. With the latest smartphones, many a times you will need to use test points to connect the phone to the computer because latest phones, Samsung inclusive, cannot just boot in BROM mode. Sometimes using test points is quite a task for those people who are not mobile phone technicians. Kindly check my other recent article about How To Bypass FRP On Nokia 2.2 (TA 188) Smartphone
To find test points, you will need to have some skills to open up a phone. Because the test points are usually found on the motherboard. If you are not good at it, then don’t try that for you will damage your phone. But to you who can’t access the test points but you have a problem bypassing FRP on your Samsung A10S Smartphone; I have good news for you. We are going to earn latest method on How to bypass FRP on Samsung A10S Without using test points. Read carefully with me and see how you can go about this task.
How to bypass FRP on Samsung A10S Without using test points.
Now, as I have mentioned earlier, you can use test points to bypass FRP on latest smartphones with the latest security patches. We have flashing software that can wipe FRP partition by connecting the phone to the PC using test points. For instance, you can also check my other article about How To Bypass FRP On Samsung A03 Core SM-A032F. But for some cases like for Samsung A10S, you can remove FRP without using test points. Let us look at the requirements you will need to have:
- Computer
- TFT Unlock software
- Internet connection
- USB Data cable
Method on How to bypass FRP on Samsung A10S Without using test points
Now, having made sure that you have the above listed tools, keenly follow the following steps and to bypass FRP on Samsung A10S without using test points. Remember in this method, you don’t need to open inside the phone.
Step 1
Download TFT Unlock tool. If you don’t already have one or you don’t know where to download it from, Use this link to download TFT unlock tool. Save the extracted zip file to a folder on your PC. Extract the zip file using the password (TFT). Install the installer on your PC and then run it. Make sure you have a stable internet connection.
Step 2
Now, after you have opened TFT, on TFT interface, you will see at the top side many smartphone models you might use. On the shown models on TFT dashboard, you now need to click on the “Samsung” tab. Now, don’t select any model under the models. Just click on the “[BROM]ERASE FRP no Test Point New Sec” option on the other side as shown in the screenshot below.
Also see: How To Remove MDM On Tecno Pop 5 Pro (BD4h) Smartphone
Step 3
Now at that point, you are on the right track towards solving this problem. Now, be careful here. You need to connect your phone to the computer. To do so, just power off your phone.
Connect your phone to the PC. Don’t hold any key or do anything. TFT will detect your phone, and wipe the FRP partition.
Step 4
After everything is done, carefully disconnect your phone from your computer. Power it up using the normal power on button. Wait for the phone to power up and finish. Because FRP was reset, it might take a little bit linger but eventually it will come up. Now, finish setting up your phone and start using it as new.
That is the easiest method on How to bypass FRP on Samsung A10S Without using test points. It will save you the stress of manual bypass or using test points. Thank you for reading. Continue checking our website for more other articles like these.
